Overview
New TFT Display & One More Transmitter Make G2(A2) a Well-deserved Plus
The SYNCO dual wireless microphone system G2(A2) distinguishes itself from G2(A1) by having the other transmitter to achieve the recording of 2-person dialogue and the flexibility of output modes, and differs from G1(A2) by a true-color TFT display on both transmitter and receiver to make each key figure such as recording mode and battery status, readable under different light intensities.
Best Dual Wireless Microphone Transmits Signals of Enhanced Stability & Security
The SyncoderTM Encrypted Transmission Algorithm 2.0 enhances the signal stability of the dual digital microphone system within 492ft/150m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It runs the Frequency Hopping Spread Spectrum (FHSS) technique to detect the location on it’s own intuitive and then by itself turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.
Integrated Signal Processing Brings Little Latency Output
The Digital Signal Processor (DSP) chip in the professional dual wireless microphone system optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery is a guarantee of the almost zero latency transmission and quality sound production, perfect for immediate use and great for live broadcast.
3-in-1 Quick Charging Supports Each Continued Recording
The 3-in-1 charging solution allows the charging of this 2 channel wireless microphone (2TX+1RX) at the same time with one power source. It takes only 40 min to get the system 50% powered and 1 hour to reach 80%. The capacity-expanded battery supports 8-hour continued if fully charged.
Small Features Run to Make Big Differences
A button is set to mute the system for a while when it comes to team communication, device setup, etc., rather than completely turning off the system. Find this function also in mini wireless microphone G1T/L.
The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, allowing the microphone system to work in more conditions.
Pocket Dual Wireless Lavalier Microphone Gets Invisible but Audible Effect
Mobile content creators would like this dual channel wireless microphone system. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, very easy to be concealed and very inconspicuous in most recording scenarios.
Specifications
Transmitter (TX )
| Wireless Transmission |
Digital 2.4GHz |
|---|---|
| RF Frequency Band |
2400-2483.5MHz |
| Frequency Response |
20Hz-20KHz |
| Working Distance |
492ft/150m (LOS area) 164ft/50m (NLOS area) |
| Mounting | Pocket Clip |
| Audio Input |
1/8" / 3.5mm TRS Mic Input |
| Audio Input Level |
1V (0dBV) |
| Power Requirements |
3.3V-4.7V |
| Battery Type |
Built-in Lithium Battery, 400mAh |
| Battery Charging Time |
1.5h |
| Battery Life |
8h |
| Display |
TFT Screen |
| Dimensions | 52×42×17mm |
| Material | Plastic |
| Weight | 39g |
Receiver (RX)
| Wireless Transmission |
Digital 2.4GHz |
|---|---|
| RF Frequency Band |
2400-2483.5MHz |
| Approximate RF Sensitivity |
-81dBm |
| Working Distance |
492ft/150m (LOS area) 164ft/50m (NLOS area) |
| Mounting |
Pocket Clip |
| Number of Audio Channels |
2 |
| Audio Output |
1/8” / 3.5mm TRS Mic Output
1/8“ / 3.5mm TRS Headphone Output
|
| Gain |
0-5 Level |
| Audio Output Level |
Line Out: 1V; Monitoring: 25-30mW |
| Power Requirements |
3.3V-4.7V |
| Battery Type |
Built-in Lithium Battery, 400mAh |
| Battery Charging Time |
1.5h |
| Battery Life |
8h |
| Display |
TFT Screen |
| Dimensions | 52×42×17mm |
| Material | Plastic |
| Weight | 39g |
Microphone
| Form Factor |
Built-in/External Mic |
|---|---|
| Sound Field |
Mono |
| Polar Pattern |
Omnidirectional |
| Frequency Range |
50Hz-20KHz |
| Sensitivity |
-40dB (±3 dB, re 1V/Pa at 1KHz) |
| Max. SPL |
135dB SPL (at 1KHz) |
